HOLIDAY FLOORING SALE! Save 50¢ per sqft on all flooring!    Use code "HOLIDAY50" - SALE ENDS 12/9/2019


Resource Center



Baseboards




The base board is a type of floor trim used with laminate, wood, vinyl, carpet, and almost any other kind of floor.

The Baseboard Alone

A baseboard is usually a wooden piece 6″ high and about 1/2 inch thick that attaches to the bottom of the wall with nails or adhesive, and touches, but is not attached to, the floor underneath. The baseboard will go all the way around the room. It protects the wall from bangs and abrasions due to furniture moved or toys rolled, and keeps dirt from gathering. This is one of the most basic types of flooring trims, though special ordered trims can come in anywhere from three to eleven inches high.*

Very rarely, the width of the baseboard itself will be used to cover the expansion gap between the edge of your floor and the wall proper. Generally this will be with hardwood installed during a new home construction, because hardwood flooring lasts so long that it is not as likely as other floors to be replaced in the lifetime of a house. Otherwise, the baseboard will almost always be flush with the subfloor before you install your new flooring. About the only time baseboards would be removed and raised to accommodate new flooring being installed underneath would be with 1/2″ high carpeting. With laminate and vinyl flooring, the floor will meet the baseboard the same way it would otherwise meet a wall, so it is treated like the bottom of the wall. This means that while it is a trim, in most cases you will still need to add a trim piece after your new floor installation. This is to cover the expansion gap which is left between the flooring and the baseboard, to allow the material to expand and contract with changes in humidity and temperature.

Enter the Base Shoe

Or the Shoe Base. Slightly different terms for the exact same object. A Base Shoe is a trim piece very close in shape to a quarter round, only taller than it is wide. Where quarter rounds are 3/4″ tall and 3/4″ wide, literally one fourth of a perfect circle, a true base shoe is usually only 1/2″ wide, rendering it a taller looking piece. Actually, a quarter round may be used for this purpose, and you will even see many other online sources cite that as the proper piece. For the most part, doing this would be more of a decorative decision than a functional one, because either added trim piece will serve to cover the expansion gap left between your flooring and the baseboard.
 
Flooring Trim - Base Board and Base Shoe Diagram
 
A base shoe must not be nailed to the floor. It needs to be nailed to the wall only. The floor underneath needs to move, even if only slightly, as the temperature and humidity change. If the trim is only nailed to the floor, it will move away from the wall (or press into it) with the floor. If it is nailed to both, the floor may warp, or the trim may come apart as the floor moves – either way, it’s not good to attach your trim (any trim) to the floor. Just let it hover over it.

 

* At 12″, what we have is a proper Wall Base, used primarily in the installation of plaster walls.

 
 

– – – –
David is a Writer at Floors To Your Home (.com), as well as the PPC Manager, a Marketing Strategy Team member, a Researcher, Videographer, Social Strategist, Photographer and all around Resource Jitō. In my spare time I shoot and edit video, explore film history, mix music (as in ‘play with Beatles multi-tracks’) and write non-fiction for my friends. Connect with me on W. David Lichty’s Google+

 
BUTTON - Perfect Room No Swath
 
 
Follow Team Floors To Your Home on Pinterest
Follow Me on Pinterest  
Our
flooring store on Google+ Local
 


2 comments on “Baseboards
  1. Ray Gill says:

    I just purchases some loose lay vinyl plank flooring. Is there any reason not to lay it diagonally on my floor?

    • admin says:

      The only reason, and it really isn’t much, is that when you lay any floor diagonally there can be more waste from cut planks. The reason is that when you’re just installing along the walls normally, the pieces you cut at the end of one row can usually be used to start another row. With diagonals this doesn’t work out as often, and with Loose Lay your cuts have to be perfectly snug to the walls no matter how you install. It just means you may discard a little more. We normally recommend 10% extra flooring for any floor to accommodate this, and with a diagonal we might recommend 5% on top of that.

      Otherwise, installed correctly a diagonal loose lay floor should be great. I wrote a piece for a customer asking about installing in a Herringbone pattern, much more complex than a diagonal, and it has some images that illustrate the things you want to look for in either of these. If that isn’t helpful enough, please ask us anything else you have to ask.

      – David

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This content comes from a hidden element on this page.

The inline option preserves bound JavaScript events and changes, and it puts the content back where it came from when it is closed.

Click me, it will be preserved!

If you try to open a new Colorbox while it is already open, it will update itself with the new content.

Updating Content Example: